Abtex Corporation has introduced a compact, wet Tri-Ten planetary head deburring system in return-to-operator (RTO) configuration.In a single pass, this system deburrs both sides of flat parts as large as 4.5” indiameter. Abtex Corporation has introduced a compact, wet Tri-Ten planetary head deburring system in return-to-operator (RTO) configuration.
In a single pass, this system deburrs both sides of flat parts as large as 4.5” in diameter. Drenching the workpiece with coolant as it is deburred keeps parts clean and extends brush life, the company says.
At one end of the system, parts are placed on a magnetic conveyor that carries them through an offset planetary deburring head where three fiber abrasive brushes deburr the upward facing surface. The parts then move to a continuous parts turnover conveyor that flips them for the return trip through the brushes.
After both sides of the part are deburred, it passes under a final coolant rinse, followed by an air knife to blow off excess coolant and is demagnetized before exiting at an opening next to the entrance.
タグ:
この会社について:
Abtex Corporation has manufactured fiber abrasive brushing tools since 1978. In 1980, we introduced the first Abtex end deburring system for aluminum extrusions. In the years since our founding we have continually expanded our brush line as well as our line of machinery. Our mission is to provide our customers with the most effective and efficient brushing solution for their specific application.
